0236 237 70 71
info@nevasinsaat.com
Machine feet are supporting elements that allow industrial machinery to rest securely on the floor, maintain level and alignment and transfer operating loads in a balanced manner. Fixed, adjustable, anchored or vibration-damping options help machines operate more steadily and preserve precise alignment.
Each system is engineered specifically according to machine weight, center of gravity, operating forces, floor structure, vibration level and maintenance requirements.
A machine foot is a steel supporting and fixing element that secures machinery or equipment to the floor, transfers loads evenly and allows level adjustment where required.
Depending on project requirements, the system may include:
Distribute machine weight and operating forces through suitable support points.
Adjustable feet allow precise leveling on uneven floors.
Anti-vibration mounts and suitable structural geometry can reduce vibration transmitted to the floor and surrounding equipment.
Help motors, gearboxes, bearings and motion systems maintain their required operating geometry.
Machined plates and mounting holes allow controlled fixing of the machine.
The system can be reinforced or rearranged when machine capacity, equipment layout or floor conditions change.
Rigid systems anchored to the floor to carry the machine continuously in a fixed position.
Use screw-and-nut mechanisms to adjust height, level and load distribution.
Use rubber, elastomer or special anti-vibration mounts to reduce vibration transfer from the machine to the floor.
Manufactured with reinforced sections for presses, dies, hydraulic units and heavy machinery.
Support movement within the facility using wheels, forklift pockets or lifting points.
Engineered specifically where standard solutions are insufficient for the required load, dimensions or operating conditions.
Each project is evaluated individually according to machine loads, floor conditions and adjustment requirements.
Machine dimensions, total weight, foot positions, operating forces, floor structure and existing connections are evaluated.
The supporting body, base plate, adjustment mechanism, anchoring points and vibration components are determined. Technical drawings are prepared.
Profiles, plates, shafts and connection components are cut, drilled, machined and welded according to project dimensions.
Foot height, connection centers, flatness, welds and installation compatibility are checked.
Electrostatic powder coating, wet paint, galvanizing or special coating is applied. Adjustment and connection components may be trial-fitted where required.
Machine feet are delivered, positioned, leveled, anchored and finally inspected on site.
Existing machine feet may develop cracks, weld damage, corrosion, deflection, loose connections or vibration-related deformation over time. Capacity increases and equipment changes may also make the current system insufficient.
Following a technical inspection, the following works may be carried out:
Material and surface treatment are selected according to load capacity, precision requirements and operating environment.
Provide high strength and cost-effective production for general industrial applications.
Used for base plates, gussets, connection elements and special support surfaces.
Can be considered for applications requiring hygiene, chemical resistance or high corrosion protection.
Help reduce vibration transfer from the machine to the floor and surrounding equipment.
Provides a durable surface for indoor use and can be matched to corporate colors.
Provide long-term protection in humid, outdoor or highly corrosive environments.
Projects are not limited to standard foot dimensions; they are prepared according to machine loads, floor structure, leveling requirements and vibration conditions.
Site survey, design, steel fabrication, surface treatment and site application are managed within a single process. In addition to new production, reinforcement, dimensional modification, connection renewal and vibration improvement of existing systems can also be carried out.
No. They are engineered specifically according to machine weight, support-point positions, floor structure and operating conditions.
Yes. Reinforced profile and plate sections can be used according to static and dynamic loads.
Yes. Screw, nut and base-plate systems can be designed according to the required height and leveling range.
Yes. Vibration-damping mounts can be used and structural rigidity can be increased.
Yes. Profile reinforcement, base-plate renewal, anchor replacement and weld repair can be applied.
Yes. Positioning, leveling, anchoring and final inspection can be included in the project scope.
Technical assessment and project engineering can be provided for a machine-foot system suited to machine loads, floor conditions and vibration levels.
You can request a quotation for new production, reinforcement of an existing system or leveling and vibration improvement by sharing your project information.
Türkçe
