0236 237 70 71
info@nevasinsaat.com
Steel transport carts are wheeled or forklift-compatible systems used to move machinery, dies, equipment, semi-finished products and heavy components safely within industrial facilities. They support balanced movement, organized transfer between production areas and reduced manual handling.
Each system is engineered specifically according to load dimensions, weight, center of gravity, floor conditions, maneuvering space, frequency of use and site requirements.
A steel transport cart is a welded or modular metal handling system used to move heavy or bulky loads within a facility in a controlled manner.
Depending on project requirements, the system may include:
Enable machinery, dies and equipment to be moved between production areas in a balanced manner.
Allow loads to be moved using wheels, forklifts or tow units.
Support movement along designated routes and orderly temporary positioning of products and equipment.
Swivel wheels, steering handles and suitable frame geometry provide controlled movement in confined areas.
Custom supports, fixing elements and platform details reduce sliding, tipping and impact risks during transport.
The cart can be reinforced, extended or rearranged when load dimensions or operating scenarios change.
Used with pushing or pulling handles for short-distance movement within the facility.
Include forklift pockets to facilitate loading, unloading and positioning.
Manufactured with reinforced sections for dies, press components, motor groups and high-weight equipment.
Used where machinery or equipment must be repositioned repeatedly within the facility.
Use removable connections to adapt to different product dimensions and handling scenarios.
Prepared with supports, cradles and fixing components for sensitive, unstable or specially shaped products.
Each project is evaluated individually according to load characteristics, transport route and site conditions.
Product dimensions, weight, frequency of use, transport route, floor structure and maneuvering area are evaluated.
Frame geometry, profile sections, platform structure, wheel arrangement, forklift pockets and fixing points are determined. Technical drawings are prepared.
Steel profiles, sheet metal, wheel connections and auxiliary components are cut, machined and welded according to project dimensions.
Electrostatic powder coating, wet paint, galvanizing or protective coating is applied. Dimensions, welds, wheel connections and frame compatibility are inspected.
Wheel movement, braking system, maneuverability, forklift pockets and load placement are checked.
The cart is delivered, and final adjustments, load-fixing components and site-compatibility checks are completed.
Existing transport carts may develop frame deformation, weld cracks, wheel wear, brake failure, corrosion or loose connections over time. Increased load capacity or changes to the transport route may also require modification.
Following a technical inspection, the following works may be carried out:
Material and surface treatment are selected according to load capacity, floor conditions and operating environment.
Form the main supporting frame of the cart. Sections are selected according to load capacity.
Used for platform surfaces, connection plates, corners and reinforcement elements.
Available in fixed, swivel or braked configurations according to load capacity, floor structure and maneuvering requirements.
Can be considered for applications requiring hygiene, wash-down resistance or high corrosion protection.
Provides a durable surface suitable for indoor use and corporate colors.
Provide long-term protection in humid, outdoor or corrosive environments.
Projects are not limited to standard cart dimensions; they are prepared according to actual load weight, geometry, floor structure and transport route.
Site survey, design, steel fabrication, surface treatment and site handover are managed within a single process. Reinforcement, wheel renewal and capacity modification of existing carts can also be carried out.
No. They are engineered specifically according to load dimensions, weight, floor conditions and operating scenario.
Yes. Reinforced profiles, platforms and wheel groups can be used according to load capacity.
Yes. Forklift pockets, pulling handles and suitable connection elements can be integrated into the design.
Yes. Fixed, swivel and braked heavy-duty wheels can be combined according to maneuvering requirements.
Yes. Profiles, platforms, wheels, brakes, forklift pockets and connection elements can be renewed or reinforced.
Yes. Depending on project scope, manufacturing-only, manufacturing and delivery, or site-handover options can be provided.
Technical assessment and project engineering can be provided for a steel transport cart suited to load dimensions, weight and transport route.
You can request a quotation for new production, reinforcement of an existing system or capacity modification by sharing your project information.
Türkçe
