0236 237 70 71
info@nevasinsaat.com
Machine frames are steel structures that form the main supporting body of motors, gearboxes, pumps, presses, conveyors, robotic equipment and custom machinery. They transfer static and dynamic loads to the floor, support accurate equipment positioning and help reduce vibration and deflection during operation.
Each system is engineered specifically according to machine dimensions, total weight, operating forces, connection points, floor conditions and maintenance access.
A machine frame is the main steel supporting structure that carries the mechanical and electrical components of an industrial machine within a defined geometry and transfers loads safely to the floor.
Depending on project requirements, the system may include:
Transfer machine weight, operating forces and equipment loads evenly to the floor.
Suitable profile sections, reinforcements and foot positions limit structural deformation during operation.
Help motors, gearboxes, bearings and motion systems remain stable within the required geometry.
Machined mounting plates and suitable hole patterns allow controlled equipment fixing.
Service openings, removable components and lifting points support maintenance operations.
The frame can be reinforced, extended or rearranged when machine capacity or equipment layout changes.
Rigid systems anchored to the floor to carry machinery continuously in a fixed position.
Can be moved within the facility using forklift pockets, lifting lugs or heavy-duty wheels.
Bolted and removable connections facilitate transport, installation and future modifications.
Manufactured with reinforced sections for presses, dies, hydraulic units and heavy equipment.
Designed for geometric accuracy and low vibration in CNC, testing, measurement and automation systems.
Carry motors, rollers, transfer units and automation equipment on a common supporting structure.
Each project is evaluated individually according to machine loads, operating conditions and site connections.
Machine dimensions, total weight, operating forces, floor, access and connection conditions are evaluated.
Frame geometry, profile sections, plate components, reinforcements, feet and mounting points are determined. Technical drawings are prepared.
Profiles and plates are cut, drilled, bent and machined according to project dimensions.
Components are assembled in suitable fixtures. The welding sequence is planned to reduce deformation, and flatness, diagonals and connection centers are inspected.
Blasting, primer, electrostatic powder coating, wet paint or galvanizing is applied. Equipment connections may be checked by trial assembly where required.
The frame is delivered, positioned, leveled, anchored and finally inspected on site.
Existing machine frames may develop cracks, weld damage, corrosion, deflection, loose connections or vibration-related deformation over time. Capacity increases and equipment changes may also make the current system insufficient.
Following a technical inspection, the following works may be carried out:
Material and surface treatment are selected according to load capacity, precision requirements and operating environment.
Provide high strength and cost-effective production for general industrial applications.
Used for mounting plates, gussets, base elements and special connections.
Can be considered for applications requiring hygiene, chemical resistance or high corrosion protection.
Provides a durable surface for indoor use and can be matched to corporate colors.
Suitable for large components or projects requiring special chemical resistance.
Provides long-term protection in humid, outdoor or highly corrosive environments.
Projects are not limited to standard profile frames; they are prepared according to actual machine loads, dimensions, operating forces and site conditions.
Site survey, design, steel fabrication, surface treatment and site application are managed within a single process. In addition to new production, reinforcement, dimensional modification, damage repair and rearrangement of existing frames can also be carried out.
No. They are engineered specifically according to machine dimensions, equipment layout, loads and site conditions.
Yes. Reinforced profile and plate sections can be used according to static and dynamic loads.
Yes. Profile reinforcement, foot renewal, mounting-plate replacement and weld repair can be applied.
Yes. Forklift pockets, lifting lugs or heavy-duty wheels can be integrated into the design.
Yes. Frame rigidity can be increased and connections can be prepared for anti-vibration mounts or adjustable machine feet.
Yes. Positioning, leveling, anchoring and final inspection can be included in the project scope.
Technical assessment and project engineering can be provided for a machine-frame system suited to machine loads, equipment layout and operating conditions.
You can request a quotation for new production, reinforcement of an existing system or dimensional modification by sharing your project information.
Türkçe
