0236 237 70 71
info@nevasinsaat.com
Pipe supports are mechanical support systems used to carry process, compressed-air, fire-protection, water, drainage, steam and utility piping safely in factories and industrial facilities. They transfer pipe loads to the structure in a controlled manner, limit deflection and help preserve maintenance access and plant organization.
Each system is engineered specifically according to pipe diameter, material, operating weight, insulation thickness, temperature, vibration, support spacing, structural connections and corrosion conditions.
A pipe support is a mechanical element that connects horizontal or vertical piping safely to ceilings, walls, columns, steel structures or custom supporting systems.
Depending on project requirements, the system may include:
Carry the combined weight of pipes, fluids, insulation, valves and fittings at calculated support points.
Correct support spacing limits deflection and supports elevation, slope and route continuity.
Fixed, sliding and guide supports manage movement caused by temperature changes.
Rubber or spring isolation elements limit the transfer of dynamic effects from pumps, compressors and machinery.
Reduce unnecessary loads on valves, flanges, expansion joints and equipment nozzles.
New lines, brackets or support modules can be added when the facility changes.
Use threaded rods and clamps connected to ceilings or steel structures for light- and medium-duty piping.
Carry single or multiple pipe runs on brackets connected to walls, columns or existing structures.
Use horizontal cross-members and multiple clamps to carry several pipes at the same elevation.
Fixed supports restrain movement at defined points, while sliding supports carry vertical loads and permit controlled thermal movement.
Use rubber or spring elements on piping connected to dynamic equipment.
Reinforced for large diameters, high loads, long spans, confined areas or integration with existing structures.
Each project is evaluated individually according to line load, temperature, route and site conditions.
Pipe types, diameters, operating weights, insulation, temperature, existing structure, route and installation access are evaluated.
Pipe elevations, support spacing, fixed-sliding points, brackets, trapeze supports, clamps and anchoring details are determined.
Steel profiles, plates, brackets, cross-members, connection plates and custom parts are cut, drilled, machined and assembled according to technical drawings.
Blasting, primer, electrostatic powder coating, wet paint, galvanizing or stainless steel is selected. Dimensions, welds and installation compatibility are inspected.
Support components are delivered; anchoring, alignment, rod adjustment, clamping, fixed-sliding supports and vibration elements are installed.
Support spacing, structural stability, pipe elevations, connections, thermal movement and maintenance access are checked before handover.
Existing support systems may require modification because of corrosion, loose connections, insufficient capacity, additional lines, route changes or vibration problems.
Following a technical inspection, the following works may be carried out:
Material and surface treatment are selected according to line load, temperature, hygiene requirements and environmental conditions.
Provide a durable and cost-effective solution for brackets, trapeze supports and primary structures.
Provides corrosion protection in indoor, semi-open and humid areas.
Provides hygiene and high corrosion resistance for food, chemical, pharmaceutical and wash-down areas.
Provide durable surfaces for indoor applications or projects requiring corporate colors.
Suitable inserts can protect pipe surfaces, reduce vibration and preserve insulation thickness.
Anchors, threaded rods, nuts, fixed-sliding supports, vibration pads and custom connection plates are selected according to the project.
Projects are not limited to standard support dimensions; they are prepared according to actual line load, temperature, expansion, vibration, support spacing, structural connections and maintenance access.
Site survey, technical design, steel fabrication, surface treatment and site installation are managed within a single process. Reinforcement, route modification and capacity increase can also be carried out on existing pipe-support systems.
No. Support type and dimensions are determined according to pipe diameter, operating weight, temperature, spacing and structural conditions.
Yes. Profiles, rods, clamps, anchors and connection details are reinforced according to load information.
Yes. Fixed, sliding and guide supports can be designed according to thermal expansion and pipe movement.
Yes. Rubber pads, spring elements or suitable vibration isolation can be used on lines connected to pumps and compressors.
Yes. Brackets, rods, clamps, anchors and support spacing can be renewed or reinforced following technical inspection.
Yes. Hot-dip galvanizing, protective coating or stainless-steel options can be applied.
Technical assessment and project engineering can be provided for a support system suited to pipe diameters, line loads, temperature and vibration conditions.
You can request a quotation for a new system, reinforcement of existing supports or additional piping by sharing your project information.
Türkçe
